BMW 3 Owners & Service Manuals

BMW 3: Date

Setting the date

Via iDrive:

1. "CAR".

2. "Settings".

3. "General settings".

4. "Date and time".

5. "Date:".

6. Turn the Controller until the desired day is displayed.

7. Press the Controller.

8. Make the settings for the month and year.

9. "OK".

Setting the date format

Via iDrive:

1. "CAR".

2. "Settings".

3. "General settings".

4. "Date and time".

5. "Date format:".

6. Select the desired setting.

The setting is stored for the driver profile currently used.

Language

Setting the language

Via iDrive:

1. "CAR".

2. "Settings".

3. "General settings".

4. "Language:".

5. "System language".

6. Select the desired setting.

The setting is stored for the driver profile currently used.

Setting the voice dialog

For voice dialog for the voice activation system.

Setting the units of measurement

Depending on the country version, you can set the units of measurement for some values, for instance consumption, distances, and temperature.

Via iDrive:

1. "CAR".

2. "Settings".

3. "General settings".

4. "Units".

5. Select the desired menu item.

6. Select the desired setting.

The setting is stored for the driver profile currently used.

Trip data settings

Concept

The intervals in which the trip data will be reset can be configured.

Resetting trip data

Via iDrive:

1. "CAR".

2. "Settings".

3. "General settings".

4. "Reset trip data".

5. Select the desired setting.

    READ NEXT:

     Speed warning

    Concept A speed limit can be set that when reached will cause a warning to be issued. General information The warning is repeated if the vehicle speed exceeds the set speed limit again, after it has d

     Activating/deactivating popup windows

    For some functions, popup windows are displayed automatically on the Control Display. Some of these popup windows can be activated or deactivated. Via iDrive: 1. "CAR". 2. "Settings". 3. "General

     Personal settings

    SEE MORE:

     Fuel high-pressure pump

    The single-piston high pressure pump by Bosch, well-known from the B46 engine, is used. The high pressure pump HDP6 is driven by a triple cam which is attached to the exhaust camshaft. To be able to accommodate a fuel system pressure of 350 bar (5076 psi), the pump piston and tappet have bee

     Timeshift

    General information The channel you are currently listening to is stored in a buffer for up to an hour. Prerequisite: the signal must be available. The stored audio track can be played with a delay following the live broadcast. When the memory is full, the older tracks are overwritten. The memory

    © 2019-2025 Copyright www.bmw3g20.com