BMW 3: System limits
Safety information
Warning The system is designed to operate in certain conditions and circumstances. Due to conditions or other factors, the system may not respond.
There may be a risk of accident or risk of damage to property. Actively intervene as warranted. Refer to the information in this Owner's Manual regarding the scope of the system's operation and limitations.
Limits of ultrasonic measurement
The detection of objects with ultrasonic measurements can run into physical limits, e.g., in the following situations:
- For small children and animals.
- For persons with certain clothing, for instance coats.
- With external interference of the ultrasound, for instance from passing vehicles or loud machines.
- When sensors are dirty, iced over, damaged or out of position.
- Under certain weather conditions, e.g., high relative humidity, wet conditions, snowfall, cold, extreme heat, or strong wind.
- With tow bars and trailer couplings of other vehicles.
- With thin or wedge-shaped objects.
- With moving objects.
- With elevated, protruding objects such as ledges.
- With objects with corners, edges, and smooth surfaces.
- With objects with a fine surface structure such as fences.
- For objects with porous surfaces.
- With small and low objects, for instance boxes.
- With obstacles and persons at the edge of the lane.
- With soft obstacles or obstacles covered in foam material.
- With plants and bushes.
- Low objects already displayed, for instance curbs, can move into the blind area of the sensors before or after a continuous tone sounds.
- Cargo that extends beyond the perimeter of the vehicle is not taken into account by the system.
False warnings
The system may issue a warning under the following conditions even though there is no obstacle within the detection range:
- In heavy rain.
- When sensors are very dirty or covered with ice.
- When sensors are covered in snow.
- On rough road surfaces.
- On uneven surfaces, such as speed bumps.
- In large buildings with right angles and smooth walls, for instance in underground garages.
- In automatic vehicle washes.
- Due to heavy exhaust.
- Due to other ultrasound sources, for instance sweeping machines, high pressure steam cleaners or neon lights.
To prevent false alarms, switch off automatic PDC activation on obstacle detection, for instance in automatic vehicle washes.
Malfunction
A Check Control message is displayed.
.png)
White symbol is displayed, and
the range
of the sensors is dimmed on the Control
Display.
PDC has failed. Have the system checked by a dealer's service center or another qualified service center or repair shop.
READ NEXT:
Without Surround View:
rearview camera
Concept
The rearview camera provides assistance in
parking and maneuvering backwards. The area
behind the vehicle is shown on the Control Display.
Safety information
Warning
The system cannot serve a
Surround View with
Parking Assistant Plus
Concept
The system provides assistance in parking and
maneuvering. The area around the vehicle is
shown on the Control Display.
General information
Several cameras capture the area from different
sele
Overview
Buttons in the vehicle
Park assistance button
Panorama View
Cameras
Front camera
Rearview camera
One camera is located at the bottom of each exterior
mirror housing.
The image quality may be im
SEE MORE:
General information, Safety information
General information
When using run-flat tires or a flat tire kit, a wheel
does not always need to be changed immediately
when there is a loss of tire inflation pressure
due to a flat tire.
If needed, the tools for changing wheels are
available as accessories from a dealer's service
center or anothe
Planning a trip
General information
When planning a trip, several intermediate destinations
can be entered.
New trip
1. Press the button on the
Controller.
2. Select the type of destination entry.
3. Select a single destination.
4. Enter an intermediate destination.
Intermediate destinations
General information
