BMW 3: Stored trips
General information
Up to 30 trips can be stored in the trip list. If necessary,
delete existing trips to be able to store
new trips.
Storing
The destination guidance for the tip must be active.
1.
Press the button on the
Controller.
2.
"Destination options".
3. "Save trip".
4. Enter the name.
5.
Select the symbol.
Selecting
1.
Press the button on the
Controller.
2.
"Trips".
3. Select the desired trip.
Editing
1.
Press the button on the
Controller.
2.
"Trips".
3. Highlight the desired trip.
4. Press the button.
5. Select the desired setting:
- "Delete entry": delete trip.
- "Rename": rename trip.
Last trip
The last trip is automatically stored and can be
called up again.
1.
Press the button on the
Controller.
2.
"Trips".
3. "Last trip created".
READ NEXT:
Map
Opening the map
The map can be accessed directly
with the
button on the Controller.
Overview
General information
The map can be used via iDrive.
Basic entry explanation, refer to the Owner's
Man
Starting destination guidance
1. Press the button on the
Controller.
2. Select the type of destination entry.
3. Select the destination.
4. If necessary, start destination guidance.
Information wi
SEE MORE:
The following graphic shows the positions of the rotary valve as the coolant
temperature increases:
Switching diagram heat management module
0% - Rotary valve closed
100% - Rotary valve open
Cold start
Warm-up phase
Operating temperature
Transition from normal operation to maximum cooling req
Displays of operating conditions
The hybrid-specific operating states and the state of charge of the
high-voltage battery unit are
displayed in the instrument cluster and, if desired, in the Central Information
Display (CID).
The displays shown below may appear, depending on the driving situation