BMW 3: Creating a driver profile
A driver profile is created or via iDrive:
1. "CAR".
2. "Driver profiles".
3. Move the Controller to the right.
As an alternative for Steps 1 to 3, the profile image can be tapped in the top status bar.
4. "Add driver profile".
ConnectedDrive countries: An existing ConnectedDrive account must be assigned to a driver profile. If a ConnectedDrive account has not yet been created, the account can be created via a smartphone. A QR code will be displayed on the Control Display for this purpose. The creation of the driver profile can continue with the access data of the created ConnectedDrive account.
Selecting recognition
The settings for the recognition are entered via iDrive:
1. "CAR"
2. "Driver profiles"
3. Move the Controller to the right.
As an alternative for Steps 1 to 3, the profile image can be tapped in the top status bar.
4. "Driver recognition"
5. Select the desired setting:
- "with vehicle key".
The vehicle key that is recognized in the car's interior is assigned to the driver profile.
If multiple vehicle keys are detected, the unintended vehicle keys must be removed from the car's interior.
- "With Digital Key".
The digital key that is recognized in the car's interior is assigned to the driver profile.
If multiple digital keys are detected, the unintended digital keys must be removed from the car's interior.
6. "Activate linkage"
As soon as the vehicle detects the vehicle key or the digital key, the corresponding driver profile will be activated. If the vehicle key or the smartphone with the digital key is not carried with you or the vehicle key or digital key is not recognized, the driver profile can only be selected on the Welcome screen when a PIN has been set up.
Setting up a PIN
A driver profile with recognition cannot be activated without vehicle key and without digital key.
In this case, a PIN can be set up to activate the driver profile.
Non-ConnectedDrive countries: If a PIN was not set up or the PIN is not known, the driver's profile cannot be activated.
ConnectedDrive countries: If a PIN was not set up or the PIN is not known, the driver's profile can be activated with the access data of the corresponding ConnectedDrive account.
Via iDrive:
1. "CAR".
2. "Driver profiles".
3. Move the Controller to the right.
As an alternative for Steps 1 to 3, the profile image can be tapped in the top status bar.
4. "Driver recognition".
5. "using PIN".
READ NEXT:
Changing/canceling the
recognition function
If another vehicle key or another digital key is to
be assigned to a driver profile, the current assignment
must be canceled first.
Via iDrive:
1. "CAR".
2. "Driver profiles".
3. Move the Controlle
Renaming a driver profile
Countries in which ConnectedDrive is not available:
The name that was assigned when the driver
profile was set up can be changed via iDrive:
1. "CAR".
2. "Driver profiles".
As an alternative for Ste
SEE MORE:
Emergency Stop Assistant
Concept
If the driver is no longer fit to drive, the system
helps to safely bring the vehicle to a standstill.
General information
The emergency stop function is not triggered
automatically. The emergency stop function can
only be triggered manually by the occupants.
When the system is activated, t
System components
The front radar sensor (FRS) or the front radar sensor long range (FRSF) is
needed to reliably detect
the vehicles in front. Consequently, adaptive recuperation is only possible with
the optional equipment
Active Cruise Control with Stop&Go function (SA 5DF).
Adaptive recuperation can be
