BMW 3: With an emergency wheel:
enlarging the cargo area
Concept
The emergency wheel and any related components
can be temporarily removed to enlarge the
cargo area.
Removing the emergency wheel
and the storage compartments
1. To remove the cargo area floor, pull it upward
directly behind the rear backrests.
.png)
2. Remove tool holder and emergency wheel.
3. Loosen the ratchet strap from the lashing
eyes.
4. Remove the storage compartment.
.png)
5. Remove the storage well.
.png)
6. Insert the cargo floor panel.
Inserting the emergency wheel
and the storage compartments
Proceed in reverse order to insert the emergency
wheel and the storage compartments.
READ NEXT:
General information
Moving parts need to begin working together
smoothly.
The following instructions will help you to achieve
a long vehicle life and good efficiency.
During break-in, do not use the
Closing the trunk lid
Safety information
Warning
An open trunk lid protrudes from the vehicle
and can endanger occupants and other traffic
participants or damage the vehicle in the event
of an accide
SEE MORE:
The charging socket of the G20 PHEV is located on the front left side panel.
The charging socket
cover is locked and unlocked using an electric motor. This electric motor drive
is controlled by the
convenience charging electronics. The charging socket cover can be opened only
in selector lev
Bridge for high-voltage interlock loop
Before the high-voltage connector can be
disconnected, the bridge for the high-voltage
interlock loop must first be removed. The bridge
closes the circuit of the high-voltage interlock
loop in a connected state. The SME and EME
control units continuous