BMW 3: Driving Dynamics Control
Concept
The Driving Dynamics Control influences the driving dynamics properties of the vehicle.
The vehicle can be adjusted depending on the situation using various driving modes.
General information
The following systems are affected, for instance:
- Engine characteristics.
- Steptronic transmission.
- Adaptive M chassis.
- Steering.
- Display in the instrument cluster.
- Cruise control.
Overview
.png)
Displays in the instrument cluster
.png)
The selected driving mode is
displayed
in the instrument cluster.
Driving modes
.png)
Buttons in the vehicle
.png)
When drive-ready state is switched on, the COMFORT driving mode is selected automatically.
Driving modes in detail
COMFORT
Concept
Balanced tuning between dynamic and efficient driving.
Switching on
.png)
Press the button repeatedly until
COMFORT
is displayed in the instrument
cluster.
SPORT
Concept
Dynamic tuning for higher agility with an optimized chassis and suspension.
Switching on
.png)
Press the button repeatedly until
SPORT is displayed in the instrument
cluster.
SPORT INDIVIDUAL
Concept
Individual settings can be adjusted in the SPORT INDIVIDUAL driving mode.
Configuration
Via iDrive:
1. "CAR".
2. "Settings".
3. "Driving mode".
4. "SPORT INDIVIDUAL".
5. Select the desired setting.
The setting is stored for the driver profile currently used.
Reset SPORT INDIVIDUAL to the standard settings: "Reset to SPORT STANDARD".
SPORT PLUS
Concept
Dynamic tuning for maximum agility with an adjusted drive.
Switching on
Press the button repeatedly until
SPORT PLUS is displayed in the instrument
cluster.
ECO PRO
Concept
Efficient driving setting.
Switching on
.png)
Press the button repeatedly until
ECO
PRO is displayed in the instrument cluster.
ECO PRO INDIVIDUAL
Concept
Individual settings can be adjusted in the ECO PRO INDIVIDUAL driving mode.
Configuration
Via iDrive:
1. "CAR".
2. "Settings".
3. "Driving mode".
4. "ECO PRO INDIVIDUAL".
5. Select the desired setting.
The setting is stored for the driver profile currently used.
Reset ECO PRO INDIVIDUAL to the standard settings: "Reset to ECO PRO STANDARD".
ADAPTIVE
Concept
Comfort-oriented driving mode, whose tuning is automatically modified to the driving situation and driving style.
If the navigation system is active, upcoming road sections are considered.
Switching on
.png)
Press the button. ADAPTIVE is
displayed
in the instrument cluster.
INDIVIDUAL configuration
General information
The individual configuration of the driving mode is stored for the active driver profile. The last set configuration is activated directly when the driving mode is called up again.
Activating configuration of the driving mode
Press the button for the desired driving mode several times.
READ NEXT:
Parking brake
Concept
The parking brake is used to prevent the vehicle
from rolling when it is parked.
Safety information
Warning
An unsecured vehicle can begin to move and
possibly roll away. There is a risk of a
Turn signal
Turn signal in exterior mirror
When driving and during operation of the turn
signals or hazard warning system, do not fold in
the exterior mirrors, so that the signal lights on
the exterior mirror are
Wiper system
General information
Do not use the wipers if the windshield is dry, as
this may damage the wiper blades or cause them
to become worn more quickly.
Safety information
Warning
If the wipers start movin
SEE MORE:
Vehicle tool kit
The onboard vehicle tool kit is located in the left
storage compartment of the cargo area under a
cover.
Wiper blades
Safety information
NOTICE The window may sustain damage if the wiper
falls onto it without the wiper blade installed.
There is a risk of damage to property. Hold the
wiper firmly w
Warning function
Light in the exterior mirror
Acute warning
If there is a risk of collision, the light in the exterior
mirror flashes and the steering wheel vibrates.
A Check Control message is displayed at
the same time.
If necessary, an active steering intervention then
takes place to prevent collisions and main
