BMW 3: Bowers & Wilkins Diamond Surround Sound System
To achieve an optimum listening experience inside the vehicle, depending on the type of music, you can choose between different sound profiles.
The surround sound can be adjusted with the "3D intensity" or "Surround intensity" function.
1. "CAR".
2. "Settings".
3. "General settings".
4. "Bowers & Wilkins sound".
5. "Sound profiles".
6. Select the desired setting.
Volume equalization
An automatic increase of the volume can be set to compensate for the increasing driving noises at higher speeds.
1. "CAR".
2. "Settings".
3. "General settings"
4. "Sound settings" or "Bowers & Wilkins sound".
5. "Volume settings".
6. Select the desired setting:
- "Navigation": ratio of spoken instructions volume to entertainment volume.
- "Speed volume": adjustment of the
speed-dependent volume control.
With Bowers & Wilkins Diamond Surround Sound System: the volume is automatically adjusted according to the driving noise that is heard in the car's interior.
- "PDC": ratio of the volume of the signal
tone of PDC Park Distance Control to the
entertainment volume.
The basic setting ensures that the signal tones are audible at any volume.
- "Gong": ratio of the volume of the signal
tone, for instance for safety belt reminder,
to the entertainment volume.
The basic setting ensures that the signal tones are audible at any volume.
- "Microphone": sensitivity of the microphone
during a phone call.
The setting is adjusted while calling and is stored for the mobile phone used.
- "Speakers": volume of the loudspeakers
during a phone call.
Audio recording playback is stopped during muting.
The setting is adjusted while calling and is stored for the mobile phone used.
7. To adjust: turn the Controller.
8. To store: press the Controller.
Reset the tone settings
The tone settings are reset to the factory settings.
1. "CAR".
2. "Settings".
3. "General settings".
4. "Sound settings".
5. "Reset".
READ NEXT:
AM/FM station
General information
Depending on the vehicle equipment and country
version, it may not be possible to receive AM
stations.
Radio Data System RDS
RDS broadcasts additional information, such as
the stat
HD Radio reception
Concept
Many radio stations broadcast both analog and
digital signals.
General information
When setting a station with a digital signal, it may
take a few seconds before the station plays in
digital q
SEE MORE:
Speed warning
Concept
A speed limit can be set that when reached will
cause a warning to be issued.
General information
The warning is repeated if the vehicle speed exceeds
the set speed limit again, after it has dropped
below it by 3 mph/5 km/h.
Adjusting
Via iDrive:
1. "CAR".
2. "Settings".
3. "General settin
Seats
Safety information
Warning
Seat adjustments while driving can lead to unexpected
movements of the seat. Vehicle control
could be lost. There is a risk of accident.
Only adjust the seat on the driver's side when
the vehicle is stationary.
Warning
With a backrest inclined too far to the rear, the
e
